Print settings

Select this menu from Device settings in Setup menu.

• Prevent abrasion

  Use this setting only if the print surface becomes smudged.

  Important

  • Be sure to set this back to OFF after printing since it may result in lower printing speed or lower print quality.

• Paper print position

  Adjusts the print position when the left/right margins are not aligned.

  You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and +0.12 in. (+3 mm) centered on the horizontal center of the paper.

  Important

  • When using A4/Letter sized paper, the amount of adjustment that can be made is limited. You cannot make adjustments greater than this limit.

• Plain paper target

  Select Text only or Text and photos for plain paper printing.

  Note

  • As print results, if you are conscious of unevenness or textures of granularity, select Text and photos.